Rolling Mill
Rolling products are used for architectural purposes, roofing and facade covering. In addition they are used in the production of heat exchangers, electrical applications, transformers, solar applications, radiators, air ducts, gutter supports, for decoration and for other general industrial applications.COPPER
Cu ALLOYS – DHP, Cu-SE, Cu-ETP, DLP, CuFe0,10; CuSn0,15
High performance alloys and coinage alloys: upon reguest.
Strips
in coils on pallets with max.12kg/mm width
- Thickness 0,10mm – 4,00mm
- Widths from 10mm to 1250mm.
Sheets
in wooden pallets of 500 – 1000kg
- Thickness 0,30mm – 4,00mm
- Width 400mm – 1250mm
- Length 400mm – 3500mm
Plates and circles can also be supplied.
BRASS
STANDARD ALLOYS, CuZn40, CuZn38, CuZn36, CuZn37-CuZn35-CuZn30; CuZn10-CuZn15; CuZn0,5 (Naval brass, Admiralty Brass)
Coils
on pallets with max. 11kg/mm width
- Thickness 0,10mm – 4mm
- Width 10mm – 1000mm
- CID 80mm – 500mm
Sheets
on wooden pallets of 500 – 1000kg
- Thickness 0,30mm – 4mm
- Width 400mm – 1000mm
- Length 500mm – 3500mm
Circles and discs can also be supplied.
Plates can also be supplied .
Widths over 1000mm up to 1250mm can be produced upon agreement.
TITANIUM ZINC
Sheets and strips are manufactured from high purity zinc (category Z1 with 99.995% zinc content, according to EN 1179), with small additions of titanium and copper, so that the resulting alloy will have concentrations in the range: titanium 0.06-0.20%, copper 0.08-1.00%, the rest being zinc.
Sheets
- Thickness 0,50 – 1,00 mm
- Width 400 - 1.000 mm
- Length up to 3.000 mm
Strips
- Thickness 0,40 – 1,00 mm
- Width 100 - 1.000 mm
Other dimensions are available upon request