Strips
Titan Zinc sheets and strips
Zinc has exceptionaly good properties from both technical and aesthetic point of view. Zinc strips and sheets are used as structural material for architectural applications, e.g. roofs, external building facades and interior decoration. It can be matched with complete drainage systems made by the same material, providing enhanced aesthetic value.
Mechanical Properties (according to EN 988)
| Yield stress (Rp0.2) | min 100 N/mm2 |
| Tensile strength | min 150 N/mm2 |
| Elongation A50 (%) | Min 35 |
| Creep Strength (%) | Max 0.1 |
General Mechanical Properties
| Young's modulus | 108 GPa |
| Shear modulus | 43 GPa |
| Poisson ratio | 0.25 |
Physical Properties
| Magnetic properties | Diamagnetic |
| Electrical resistivity | (20 °C) 59.0 nΩ·m |
| Thermal conductivity | (300 K) 116 W·m−1·K−1 |
| Coefficient of thermal expansion lengthwise to lamination | 0.022 mm/m oC |
| Coefficient of thermal expansion transversal to lamination | 0.017 mm/m oC |
| Phase | solid |
| Density (near r.t.) | 7.2 g·cm-3 |
| Liquid density at m.p. | 6.57 g·cm-3 |
| Melting point | 419 °C, 787 °F |
| Boiling point | 907 °C, 1664 °F |
| Bending and cold forming | Excellent behavior |
| Specific heat 20 oC | 0.401 kJ/Kg oC |
Titan Zinc sheets and strips are manufactured from high purity zinc (category Z1 with 99.995% zinc content, according to EN 1179), with small additions of titanium and copper, so that the resulting alloy will have concentrations in the range: titanium 0.06-0.20%, copper 0.08-1.00%, the rest being zinc. This alloy is subsequently processed to sheets and strips, with closely monitored production processes, so that the end products are in full compliance to the requirements of EN 988 standard.
In TITAN GREY produced by Sofia Med, the appearance of the exposed surface has a uniform and stable coloring with life expectancy well beyond that experienced with bare metal surface. A plastic surface film can be applied to protect the surface from accidental damages until the time of application. This material is removed after the installation.
DIMENSIONS
| Sheets | |||
| Thickness (mm) | Width (mm) | Length (mm) | Mass per m2 (kgr) |
| 0,55 | 4,0 | ||
| 0,60 | 4,3 | ||
| 0,65 | 400, 600 | 4,7 | |
| 0,70 | & 1000 | 2000 - 3000 | 5,0 |
| 0,80 | 5,8 | ||
| 1,00 | 7,2 |
| Strips | |
| Thickness (mm) | Width (mm) |
| 0,60 | |
| 0,65 | |
| 0,70 | 200, 250, 330, 500, 670 & 1000 |
| 0,80 | |
| 1,00 |
Other dimensions are available upon request.
Environmentally Friendly
Titanium Zinc products are not affected by environmental factors and stay unaltered with time. Besides, it is fully recyclable, without any environmental effect.